[s-cars] 1.8t Coil Pack Conversion - Update

[Mark Strangways]

Dave if you wire loom is melting... is it do to ambient heat, or mutual 
heating from he enclosed electrical wires.

Mark S
----- Original Message ----- 
From: "Dave Forgie" <forgied at ae.ca>
To: <s-car-list at audifans.com>
Sent: Monday, September 26, 2005 2:22 PM
Subject: [s-cars] 1.8t Coil Pack Conversion - Update


> The car ran quite nicely on the Leavenworth run.  There were a couple of
> "stumbles" but I am not blaming the coil packs (yet)p-could be my wiring.
>  One thing that I saw before the trip and during was my "Pep Boys"
> (acutally Canadian Tire for me) 1/4" split plastic wire loom is melting.
>
> Not good.
>
> One of the cars on the Leavenworth run was a 3.2TT coupe (with the 6
> spd DSG tranny).  This car has plastic wire loom that is capable of 
> sucking
> up some heat without problems.  I have asked at a "tame" dealer for info
> on this loom material but nothing shows.  Anybody with a source to
> Wurth, etc. that may show this non-melting wire loom?
>
> Dave F.
>
>
> This e-mail and its attachments are intended solely for the person or 
> entity
> to which it is addressed and may contain confidential and/or privileged
> information.  Any review, dissemination, copying, printing or other use of
> this e-mail by persons or entities other than the addressee is prohibited
> If you have received this e-mail in error, please contact the sender
> immediately and delete the material from any computer.
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>