[s-cars] Link to Dennis Graber's 1.8t Coil Pack Conversion Photos and wri...

[DGraber460 at aol.com]

In a message dated 4/1/2006 9:10:05 A.M. Mountain Standard Time,  
dooksniffer at gmail.com writes:

Dennis  or anyone in the know,

Are the rubber boots you used at the coil  connection from salvaged cars or
did you find them at your dealer?   Part #?

The reason I ask is that the plastic connectors that Dave used  have been on
back order for a couple weeks now and I need to start moving  forward on my
conversion.

TIA

Ron

On 1/18/06, Dave  Forgie <forgied at ae.ca> wrote:
>
> Dennis did a great  job.  You should have a look.
>
>  http://forums.audiworld.com/s4s6/msgs/102991.phtml
>
> Dave  F.
>
>
> This e-mail and its attachments are intended solely  for the person or
> entity
> to which it is addressed and may  contain confidential and/or privileged
> information.  Any review,  dissemination, copying, printing or other use of
> this e-mail by  persons or entities other than the addressee is prohibited
> If you have  received this e-mail in error, please contact the sender
> immediately  and delete the material from any computer.



The rubber boots are part # 4B0-906-102. That makes a real nice  professional 
connection for the wires. The plastic connector snapping on to the  coil is 
#4B0-973-724, but I think there is a better connector that is better  suited 
for the wires we used. The small rubber seals that seal each wire in the  
connectors are #357-972-741-A.
I can check Monday to see if my source has any if needed.
HTH


 
Dennis
Denver