[s-cars] Boost gauge in a pod...

[Eric Phillips]

Calvin,

I haven't yet seen the pod "in the flesh", so I don't know how much
room will be behind it.  I am ASSuming that the pneumatics and
electrics can be run under the pillar trim.

If I have to drill a hole in the relay box, I guess I better figure
out how to seal it well, so that water and/or crud doesn't get in.

Thanks for the tips, I'll look at the situation in the morning.  How
did you tap off the IM?

On 4/24/06, calvinlc at earthlink.net <calvinlc at earthlink.net> wrote:
> I routed mine through the relay box in the left hand corner of the cowl.
> There is plenty of space through the box.  I can't remember if I drilled an
> exact size hole in the relay box to get it in there or not.  I put the gauge
> on the a-pillar and routed the vacuum hose up through the vent on top of the
> dash.
> --Calvin