[s-cars] A-pillar trim
Eric Phillips
gcmschemist at gmail.com
Sun Aug 27 19:41:40 EDT 2006
The ForgieMethod for removing this trim works. I have a method that worked
for me:
1.) Wash hands.
2.) Using a clean BF screwdriver, insert it under the trim on the door
side, about 4 inches down from the top. Pry. (Take care to avoid the cell
mic wiring under there - you're trying to pry on the a-pillar itself.)
This way worked for me.
3.) After you get the trim loose, put a little light grease in all the holes
on the a-pillar. This makes subsequent removal of the trim a very simple
job, with no "Bang!" of surprise as the trim lets go.
Good luck.
Eric
More information about the S-CAR-List
mailing list