[s-cars] Driveshaft center support bearing and hanger

[motogo1]

It may be that the driveshaft front CV needs to be greased. It can dry out
and makes noise under hard acceleration. Quite easy for a shop familiar with
Audi to remedy. BTDT.

Gary Martin
94 UrS4
91 200 TQA
03 allroad

----- Original Message ----- 
From: "JR" <audiurs4 at mailforce.net>
To: <s-car-list at audifans.com>
Sent: Saturday, December 16, 2006 3:02 PM
Subject: [s-cars] Driveshaft center support bearing and hanger


> I've got a bad vibration and noise coming from directly under the
> parking brake lever.  It is is hardly noticeable under normal driving,
> but very pronounced under  hard acceleration.  I took it to a Tires Plus
> just to have them figure out what it was because I had no way to get
> under the car at the time.  It turned out to be a failed drive shaft
> center support bearing and/or hanger.  Any of you listers have
> experience with this failure?  What is the procedure for replacing said
> bearing and hanger?  What are the part numbers of the bearing and hanger
> and where can I get them?
>
> Thanks,
>
> JR
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>