[s-cars] NAC: Garage floor

[Jerry Scott]

I would suggest that you do the acid cleaning, otherwise you will find 
that oil stains are deeper into the concrete than you think.  If you do 
not get all of the oil out of the concrete, the epoxy will eventually 
blister and come loose from the floor in places where it was not fully 
cleaned.
Jerry

Ivan Demkovitch wrote:

>Steve,
> 
>Sure, I like to have more details about that. Did you compare them to UCOATIT stuff?
>They say I need Ucoat and Ugloss.
> 
>Also, I'm worrying about few other things.
>1. I have cracks. Ucoat sell epoxy crack filler. Does it work well?
>2. Sanding machine that I will rent. Is it enough to prep floor or I still need to do muratic acid? I prefer not...
> 
>There will be me and a helper. I may need to find somebody else if this other stuff dries so quick.
>Can't I mix it in smaller portions to do half at a time? My garage isn't big, only 420 sq ft
> 
>Thanks,
>Ivan
>
>----- Original Message ----
>From: "Young, Steve" <sryoung at trane.com>
>To: Ivan Demkovitch <idemkovitch at yahoo.com>; "s-car-list at audifans.com" <s-car-list at audifans.com>
>Sent: Thursday, February 23, 2006 2:56:00 PM
>Subject: RE: [s-cars] NAC: Garage floor
>
>
>Ivan...
>
>.............
>
>I can get you specifics on the product if you are serious.  Good luck.
>
>
>Regards,
>
>                TRANE
>Steven Young
>Local Operations Manager
>Albany Office
>
>
>
>
>-----Original Message-----
>From: s-car-list-bounces at audifans.com
>[mailto:s-car-list-bounces at audifans.com] On Behalf Of Ivan Demkovitch
>Sent: Thursday, February 23, 2006 3:40 PM
>To: s-car-list at audifans.com
>Subject: [s-cars] NAC: Garage floor
>
>I know it's a good group to ask :)
>
>Last time I did research on this topic - epoxy paint from ucoatit.com was
>considered one of the best.
>
>What's new this days?
>
>I'm almost finished with all other garage aspects (light, heat/cool, in-wall
>air line, tons of outlets) - need to order paint. 
>
>Also, where do I rent machine to sand by concrete floor? It's old and
>instead of using acid I would rather sand it all to brake top layer.
>
>Any advices appreciated.
>
>Need to do this fast as I plan on changing S4 clutch using car lift :))
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>
>  
>