[s-cars] HID Install
Mark Strangways
Strangconst at rogers.com
Thu Jan 5 00:32:28 EST 2006
Ya I noticed that as well. By design ?
I would have to think so.
I will examine the wiring diagrams later
Mark
----- Original Message -----
From: "Matthew Russell" <skippertgore at msn.com>
To: <s-car-list at audifans.com>
Sent: Wednesday, January 04, 2006 9:24 PM
Subject: RE: [s-cars] HID Install
> Mike - I pulled both ground and hot from the main harness connector
> going to the exterior of the light. Instead of notching the cover and
> running wires out the side, i drilled with a holesaw for a tight and
> clean fit for the rubber grommet to fit perfectly into. That flat spot
> on the cover worked well. My reason for this was similar to another
> lister who posted on audiworld (sorry, name escapes me...) that if
> something in the setup blows, i can revert back to the silverstars with
> little work.
>
> One thing i noticed after is the lows now stay on with the highs... was
> this always so? I guess I never noticed.
> my 0.02
>
> -Matt, CO
> 92 s4, with H1 HID's. Oh, and a leaking J-hose.
>
>
> On Wednesday, January 4, 2006, at 03:57 PM, Mike wrote:
>>
>> I am preparing to do the install of the GP HID's. Thanks to Lino for
>> the
>> good photos and words showing how painless the install can be. Only
>> one
>> issue remains. I have the Euro headlights with the H1 low beam bulb.
>> I
>> have to pick up a ground inside the headlight assembly for the HID
>> electronics. It appears that the ground on the existing H1 is a
>> crimped
>> assembly on the bulb holder assembly. Anyone doing the install have
>> suggestions where exactly to get a good ground (the brown wires in the
>> headlight) to attach to the black HID connector?
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
More information about the S-CAR-List
mailing list