[s-cars] Re: //S4cylinder (still striking out) 1.8 coil mod.

[Kenneth Keith]

Hi Dave,

Thanks for the heads up.  So this thing must obviously be able to work
with the deeply-recessed spark plug holes on a 20vt motor.  I'll look
for one of those.  If you happen to come across the part number, maybe
you could post it later?

Thanks,

Ken

On 1/26/06, djdawson2 at aol.com <djdawson2 at aol.com> wrote:
>
> Ken,
> I have a Snap-On compression tester... and it came with multiple ends for
> various spark plug sizes, and connects to the gauge with a quick disconnect.
>  As such, it could easily be used to accomplish what you're talking about.
>
> Dave
> -----Original Message-----
> From: Kenneth Keith <auditude at gmail.com>
>
> Jim or anyone,

Where can I find the adapter to screw into the spark plug
> hole to use
compressed air to hold the valve up while doing the valve seals
> and
such? I was searching for one online, and mostly could only come up
with
> hits from the U.K. I think I wasn't using the correct search
terms (I don't
> remember what they were right now
> either).

Thanks,

Ken