[s-cars] Re: //S4cylinder (still striking out) 1.8 coil mod.

[djdawson2 at aol.com]

Well... I bought that tester about 15 years ago.  However, they are likely still making the similar kit.  Each plug thread adapter is about 8 inches long, and has a male fitting on the end that culd be hooked up to shop air to hold the valves in place.
 
Look at this:
http://buy1.snapon.com/catalog/item.asp?item_ID=75297&group_ID=1424
 
Looks similar to mine, except mine came with about 8 different ends.
 
Dave
 
-----Original Message-----
From: Kenneth Keith <auditude at gmail.com>
To: djdawson2 at aol.com <djdawson2 at aol.com>
Cc: s-car-list at audifans.com; AUDIJIM at aol.com; dherman74 at gmail.com
Sent: Thu, 26 Jan 2006 12:22:19 -0700
Subject: Re: [s-cars] Re: //S4cylinder (still striking out) 1.8 coil mod.


Hi Dave,

Thanks for the heads up.  So this thing must obviously be able to work
with the deeply-recessed spark plug holes on a 20vt motor.  I'll look
for one of those.  If you happen to come across the part number, maybe
you could post it later?

Thanks,

Ken