[s-cars] in tank fuel guage/float

[brian hoeft]

yeah, did that once to be absolutely sure.  no interference.

i suspect the problem lays i my solder job.

thanks, //brian

On 7/2/06, Jerry Scott <jerryscott at wispertel.net> wrote:
>
> I have not changed the pump, but I have heard others say that unless you
> are very careful about putting all the wires back the same way, the
> float can hang up and give incorrect readings.  This has been a common
> problem.  So, you will likely have to take it out again and find the
> float problem.
> Jerry
>
> brian hoeft wrote:
>
> >hey listers, anyone know whether or not the float arm/lever sends signal
> to
> >the IC based on current/resistance/etc. to calculate fuel level..
> >
> >or is it purely mechanical?
> >
> >when i replaced my fuel pump i soldered the severed wire back
> together.  it
> >used to be completely dead, now i get a half tank indicated when filling
> >up.
> >
> >i have checked to be sure im clearing the fuel lines in the tank for full
> >range of motion on the lever.
> >
> >any feedback would be great, thanks, //brian
> >_______________________________________________
> >S-CAR-List mailing list
> >S-CAR-List at audifans.com
> >http://www.audifans.com/mailman/listinfo/s-car-list
> >
> >
> >
> >
> >
>
>