[s-cars] Turbo to downpipe nut

[Sean Douglas]

Buy a 15 mm half moon wrench and take a MAPP torch and bend the end over
to about a 90 degree angle or so. A picture of this is shown in Bentley.

Works like a charm.

Sean
1997 S6

> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Igor Kessel
> Sent: Sunday, July 09, 2006 6:24 PM
> To: Audi S-list
> Subject: [s-cars] Turbo to downpipe nut
> 
> 
> Folks,
> what is the preferred method of undoing the lower inner nut? 
> Yeah, that 
> hard to reach sumbich, the 15mm one. The three 17mm ones are 
> easy to get 
> to but this last bottom one is driving me crazy.
> 
> -- 
> Igor Kessel
> two turbo quattros _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com 
> http://www.audifans.com/mailman/listinfo/s-> car-list
>