[s-cars] Turbo to downpipe nut - picture

[Sean Douglas]

Here is a link to the Bentley picture.

http://pictureposter.audiworld.com/52091/wrench.jpg

Sean

> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
> Sent: Monday, July 10, 2006 7:31 AM
> To: 'Igor Kessel'; 'Audi S-list'
> Subject: Re: [s-cars] Turbo to downpipe nut
> 
> 
> Buy a 15 mm half moon wrench and take a MAPP torch and bend 
> the end over to about a 90 degree angle or so. A picture of 
> this is shown in Bentley.
> 
> Works like a charm.
> 
> Sean
> 1997 S6
> 
> > -----Original Message-----
> > From: s-car-list-bounces at audifans.com
> > [mailto:s-car-list-bounces at audifans.com] On Behalf Of Igor Kessel
> > Sent: Sunday, July 09, 2006 6:24 PM
> > To: Audi S-list
> > Subject: [s-cars] Turbo to downpipe nut
> > 
> > 
> > Folks,
> > what is the preferred method of undoing the lower inner nut?
> > Yeah, that 
> > hard to reach sumbich, the 15mm one. The three 17mm ones are 
> > easy to get 
> > to but this last bottom one is driving me crazy.
> > 
> > --
> > Igor Kessel
> > two turbo quattros _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com 
> > http://www.audifans.com/mailman/listinfo/s-> car-list
> > 
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>