[s-cars] Turbo to downpipe nut

[Igor Kessel]

ELLIEOLSEN at aol.com wrote:
> I think I used a 17 mm shorty from Craftman...sure yours is 15mm?
>  
> In a message dated 7/9/2006 8:24:38 P.M. Central Daylight Time, 
> KBATPO at comcast.net writes:
> 
>     Folks,
>     what is the preferred method of undoing the lower inner nut? Yeah, that
>     hard to reach sumbich, the 15mm one. The three 17mm ones are easy to
>     get
>     to but this last bottom one is driving me crazy.
> 
>     -- 
>     Igor Kessel
> 
>  

The top three ones are indeed 17mm. The inner bottom one is 15mm cuz it 
it really tight in there. I have just picked up a 15mm Craftsman 
"stubby" wrench. The semi-circular "half moon" ones were nowhere to be found

-- 
Igor Kessel
two turbo quattros