[s-cars] Hose Clamp on Fuel Pressure Regulator

[Sean Douglas]

I used the proper one-time-use clamps made by Oetiker. The worm drive
clamps don't work that well at small diameters because the tend to
deform.

Sean

> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Douglas Fifield
> Sent: Wednesday, July 12, 2006 12:52 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] Hose Clamp on Fuel Pressure Regulator
> 
> 
> Folks,
> 
> I am going to change my FPR in hopes of clearing up my 
> intermittant miss/stutter/power loss.  The hose clamp that is 
> on the stock FPR is one of those "use once" clamp designs.  
> Due to the pressures involved, can I safely use a worm drive 
> clamp from the flaps, or do I need the clamp shut variety?
> 
> D.
> 
> As I hoped to do this today, any quick answers appreciated.
> 
> -- 
> Douglas in MN
> 95.5 Audi S//6 Avant
> 73 BMW R60/5 mit Toaster Tank 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com 
> http://www.audifans.com/mailman/listinfo/s-> car-list
>