No subject

three torx screws and test it on the bench if you have a powersource
(30 Amps is what the Bentley describes).  So, I am not sure what to
replace at this point.

Any suggestions?

D.

On 8/8/06, Chris Semple <chris at force5auto.com> wrote:
>
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com]On Behalf Of Douglas Fifield
>
> In the way of an update, I took it to the closest Audi dealer,
> Maplewood Audi in the Twin Cities.  They were very nice and helpful -
> charged me the minimun shop time segment, determined that it was the
> motor/regulator combo that was bad, pulled the motor, raised the
> window, stuck motor back in.
>
> I asked for a P/N for the part and was given 4A0 959 801.  The FA
> lists this as the "window lift motor".  Does anyone know if that P/N
> includes the regulator as well?
>
> Chris Semple - do you know?
>
> --snip--
>
> Hi Doug, that's the motor itself, not the regulator(track on which the
> mechanism raises/lowers the glass). It's a '92-'95 crossover part, 40$ used
> would be current for it, not an S-car specific item by any means. No need to
> go new unless you so desire, it's not a common failure item. Bolts on w/3
> torx screws as I recall.
>
> -Cheers
> Chris Semple
> Concord NH
> '84 4000q
>    '04 F350 DRW
>       '93 E350 Club
>
>
>


-- 
Douglas in MN
95.5 Audi S//6 Avant
73 BMW R60/5 mit Toaster Tank