[s-cars] Crossover pipe

[Robert Rossato]

I'm wondering now if Sean was possibly referring to the aluminum ones
that NEA used to sell?  Those probably fit without additional hardware,
though no first hand experience.

Bob

> -----Original Message-----
> From: Fred Munro [mailto:munrof at sympatico.ca] 
> Sent: Sunday, June 11, 2006 3:05 PM
> To: Robert Rossato; 'Sean Douglas'; mlbess at optonline.net; 
> s-car-list at audifans.com
> Subject: RE: [s-cars] Crossover pipe
> 
> 
> Bob;
> 
> As you mention, I had to use the additional brackets and 
> grommets on my '97
> S6. The brackets as welded to the pipe did not mate up to the mounting
> points on the S6.
> 
> Fred
> 
> -----Original Message-----
> From: Robert Rossato [mailto:r0ssat0_987 at att.net]
> Sent: June 11, 2006 1:22 PM
> To: 'Sean Douglas'; 'Fred Munro'; mlbess at optonline.net;
> s-car-list at audifans.com
> Subject: RE: [s-cars] Crossover pipe
> 
> 
> Seam - There are mounting tabs welded on to the aluminum 
> pipe, but they
> are supposed to interface with some additional brackets and grommets
> that were not used on the S6.  Though it seems you can make it work
> based on your comment.
> 
> Bob
> 
> > -----Original Message-----
> > From: s-car-list-bounces at audifans.com
> > [mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
> > Sent: Sunday, June 11, 2006 1:06 PM
> > To: 'Fred Munro'; mlbess at optonline.net; s-car-list at audifans.com
> > Subject: Re: [s-cars] Crossover pipe
> >
> >
> > Fred: The metal pipe I installed to replace my plastic one had the
> > mounting tabs welded to it and it matched up perfectly.
> >
> > Mike: There was a few for sale on Audifans, left over from FMIC
> > upgrades.
> >
> > Sean
> > 1997 S6