[s-cars] Crossover pipe

[Sean Douglas]

No, mine is the OEM one.

Now that I think about it, it is a tight fit getting the one end of the
tab to line up with the hole in the snub mount, but it does fit nicely.

But, I could have sworn that the plastic one and the metal one are
identical with regard to mounts...

Sean

> -----Original Message-----
> From: Robert Rossato [mailto:r0ssat0_987 at att.net] 
> Sent: Sunday, June 11, 2006 12:09 PM
> To: 'Fred Munro'; 'Sean Douglas'; mlbess at optonline.net; 
> s-car-list at audifans.com
> Subject: RE: [s-cars] Crossover pipe
> 
> 
> I'm wondering now if Sean was possibly referring to the 
> aluminum ones that NEA used to sell?  Those probably fit 
> without additional hardware, though no first hand experience.
> 
> Bob
> 
> > -----Original Message-----
> > From: Fred Munro [mailto:munrof at sympatico.ca]
> > Sent: Sunday, June 11, 2006 3:05 PM
> > To: Robert Rossato; 'Sean Douglas'; mlbess at optonline.net; 
> > s-car-list at audifans.com
> > Subject: RE: [s-cars] Crossover pipe
> > 
> > 
> > Bob;
> > 
> > As you mention, I had to use the additional brackets and
> > grommets on my '97
> > S6. The brackets as welded to the pipe did not mate up to 
> the mounting
> > points on the S6.
> > 
> > Fred
> > 
> > -----Original Message-----
> > From: Robert Rossato [mailto:r0ssat0_987 at att.net]
> > Sent: June 11, 2006 1:22 PM
> > To: 'Sean Douglas'; 'Fred Munro'; mlbess at optonline.net; 
> > s-car-list at audifans.com
> > Subject: RE: [s-cars] Crossover pipe
> > 
> > 
> > Seam - There are mounting tabs welded on to the aluminum
> > pipe, but they
> > are supposed to interface with some additional brackets and grommets
> > that were not used on the S6.  Though it seems you can make it work
> > based on your comment.
> > 
> > Bob
> > 
> > > -----Original Message-----
> > > From: s-car-list-bounces at audifans.com 
> > > [mailto:s-car-list-bounces at audifans.com] On Behalf Of Sean Douglas
> > > Sent: Sunday, June 11, 2006 1:06 PM
> > > To: 'Fred Munro'; mlbess at optonline.net; s-car-list at audifans.com
> > > Subject: Re: [s-cars] Crossover pipe
> > >
> > >
> > > Fred: The metal pipe I installed to replace my plastic 
> one had the 
> > > mounting tabs welded to it and it matched up perfectly.
> > >
> > > Mike: There was a few for sale on Audifans, left over from FMIC 
> > > upgrades.
> > >
> > > Sean
> > > 1997 S6
>