[s-cars] O2 Sensor Replacement?

[Robert Myers]

The OXS trick:  Go to FLAPS and purchase a good quality oxygen sensor 
socket for use with your 18 inch 1/2" drive beaker bar.  Then use it.


At 09:22 PM 6/11/2006, HOOG23 at aol.com wrote:
>I just purchased an oxygen sensor (#13019) for my S6.
>
>Are any special tools needed to replace it?  I'm assuming that there  isn't
>too much involved in replacing it.  I'll apply some high 
>temp  anti-seize when
>I install the new one.
>
>I guess that I'm still running the original one (@ 81k miles) so it is
>probably time for replacement.
>
>The last couple of months my idle has slowly deteriorated (especially now
>when I turn on the AC).  I'm also replacing the spark plugs (I found Dave's
>write up on AW).  Note that I had my mechanic replace the spark 
>plug  connectors
>last year.
>
>Thanks in advance.
>
>Dave Brown
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.394 / Virus Database: 268.8.3/361 - Release Date: 6/11/2006