[s-cars] Tie rod ends

[Ivan Demkovitch]

JR,
 
It's not hard at all, you should be able to do it yourself. 
But car need to be aligned after that. Depending on how much it cost and if $300 includes it - you may reconsider.
 
Ivan
 
Date: Fri, 23 Jun 2006 08:35:39 -0500
From: JR <audiurs4 at mailforce.net>
Subject: [s-cars] Tie rod ends
To: s-car-list at audifans.com
Message-ID: <449BEE2B.4030701 at mailforce.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I'm getting quoted over $300 to replace both tie rod ends in the front 
of my URS4.  They want to charge $99 for each tie rod end just for the 
part and then $60 for each install.  I checked S-CARS Parts Direct and 
they only want $28 each for the part.  My question is this: How hard is 
it to replace these if I want to do it myself?  For reference I've done 
both front lower control arms and did my own timing belt/serp belt/water 
pump, so I'm not afraid of a wrench.  How long should it take me and do 
I need any special tools?  Anyone have a write-up that I can use as a guide?

Thanks,

JR