[s-cars] How many people on this list have gone the 2.6l route?

[Ron Wainwright]

 Well I'm one of those people!
 This is what I plan on using as posted below.

 With the exception of I know what turbo I'm using
which is the GT 35R.

 At first I was going to go with the 92.8mm crank so I
could still utalize my AAN block..all I would have to
do is change the pistons, & probley the rods(since I
would be in there). But I got a great deal on the Euro
van block which use a 155mm rod.

 I'm going to go with the 034MS 2C for Engine
managment. Instead of AEM. I was looking at
Motech/Haltech for EM, But Javads got the best stuff
out there.

 The only question I have is bearings...I need to know
if the Rs2 "Hardened" Bearings will work The part #'s
I have are,
034 198 491A for Sport q, Euro van(ACU/AAB), 7A, MC,
WR, GU, & WX. 
 The other part #'s 034 198 491C for AAN, ADU, ABY,
3B, & RR.
 Others who'v used the setup I'm using have any words
of wisdome on Bearings???
> 
> 
> -----Original Message-----
> From: Ron Wainwright [mailto:ron_01056 at yahoo.com]
> Sent: Sunday, June 18, 2006 8:15 PM
> To: calvinlc at earthlink.net
> Subject: RE: [s-cars] 2.5 Eurovan crank &..
> 
> 
> 
>  Calvin, As usual with most decisions they change.
> My
> new route(today) is I just got offered a Eurovan
> bottom end. Block, crank(95.5mm), Pauter rods, &
> Weisco pistons. For an incredibly low price! That'll
> take care of the lower end,
> then I'll do valves & seals, HD valve springs, light
> weight lifters, thinking about 7A exhaust & intake
> cams, Bla, Bla, Bla
>  Turbo is still up in the air. But it will be a
> Garrett BB GT turbo.
>  Going to do a new intake. Like this,
> http://www.tdif.com/phpBB2/viewtopic.php?t=118
>  & a big bore throttle body. this,
>
http://search.ebay.com/75mm-throttle_W0QQfkrZ1QQfromZR8
>  A better desighn manifold. This,
> http://www.tdif.com/phpBB2/viewtopic.php?t=128 
> Thanx
> Ron
> 90 80q 20vt STROKER AAN project
> 90 V8q 3.6 not stock
> 93 V8q 4.2 "The Green Monster"
> & a Porsche 944 F.S(somethings gotta go!)
> 
>  There are alot of other things that I'll need as
> well
> to tigh everything together. But getting such a
> great
> deal on a lower end all ready done will save a lot
> of
> $.
>  With the 92.8mm route woulld have cost close to
> $10G
> 
> --- calvinlc at earthlink.net wrote:
> 
> > Ron,
> >
> > I have been contemplating doing something similar
> > with my S4.  Please let me
> > know how it turns out.  I would love to take a
> ride
> > in it if/when you get it
> > done.  (I assume you are in CO if you are talking
> to
> > Dave Jones).
> >
> > --Calvin
> >
> >
> > -----Original Message-----
> > From: s-car-list-bounces at audifans.com
> > [mailto:s-car-list-bounces at audifans.com]On Behalf
> Of
> > Ron Wainwright
> > Sent: Friday, June 16, 2006 3:36 PM
> > To: mlped at qwest.net
> > Cc: s-car-list at audifans.com
> > Subject: Re: [s-cars] 2.5 Eurovan crank &..
> >
> >
> >
> >  Ha inside joke...but Mr Jones got a hold of me
> > about
> > my options & others as well on the motorgeek site
> &
> > I
> > think I'm going to go this route(& if any ones got
> > suggestions feel free to voice them),
> > 92.8 crank
> > widened HG
> > Scat rods 144mm
> > Garrett BB Gt turbo probably going with the 3071.
> > What
> > you guys think?
> > Weisco pistons 29.6mm CH what would be the wrist
> pin
> > mm?
> > header probably a Lovefab looks sexy as hell
> > Intake Manifold, would like to hear some info on
> > this.
> > 034MS 2C 20vt package
> > plug in coil packs for the 2C
> > head machined, valves, seals, HD Valve springs,
> > lifters, port/polish
> > Exhaust will be tremendous, & flow like a
> > sunavamabeech
> >  & some other this & that stuff.
> >  Hope to achieve around 500WHP?
> >
> >  All this motor will be going into a 90 80q!
> >  Any & all info greatly appreciated.
> > Thanx
> > Ron
> > 90 80q 20vt AAN project
> > 90 V8q 3.6 not stock
> > 93 V8q 4.2 "The Green Monster"
> > & a Porsche 944 F.S
> >
> > --- mlp on D530 <mlped at qwest.net> wrote:
> >
> > > Go ahead Joe.  Rub it in.  Wish I could offer
> some
> > > BTDT ..... unfortunately
> > > it's never happened.  There is, if Ron wants to
> > > search, a fair amount of
> > > information in the list archives on 2.5
> "stroker"
> > > lore, and there is,
> > > waiting in the wings Hap's project in the making
> > > with Dave Jones.
> > >
> > > HTH someone, but so far the best I can offer is
> > only
> > > either good luck, or
> > > ..... does some one what to buy a lot of
> expensive
> > > parts?  :-)
> > >
> > > Mike
> > >
> > > >-----Original Message-----
> > > >From: s-car-list On Behalf Of Joe Pizzimenti
> > > >
> > > >Paging Pedersen...
> > > >
> > > >On 6/15/06, Ron Wainwright
> <ron_01056 at yahoo.com>
> 
=== message truncated ===


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com