[s-cars] New motor mounts
Sean Douglas
quattro20v at telus.net
Fri Mar 17 10:15:49 EST 2006
Yes, that can be done, but the gap between the poly mount and the
bracket is the same as stock, about 8 mm above and below. What others
have done was to find a suitable diameter tube of rubber and wrap it
around it effectively reducing the gap and movement. Over on AudiWorld,
they are using a rubber PVC coupling or even an old piece of the
Michelin man hose!
http://forums.audiworld.com/s4s6/msgs/78276.phtml
Sean
> -----Original Message-----
> From: Harold McComas [mailto:HaroldMcComas at comcast.net]
> Sent: Thursday, March 16, 2006 8:47 PM
> To: s-car-list at audifans.com
> Cc: quattro20v at telus.net
> Subject: Re:[s-cars] New motor mounts
>
>
> How about the 034 snub mount in the stock hole? Currently
> planning on trying
> that with the mod upgrade.
> 034 lists two different compounds I am assuming everyone is
> getting the
> stiffer one?
>
> Harold
> > From: "Sean Douglas" <quattro20v at telus.net>
> > Subject: Re: [s-cars] New motor mounts
> > To: "'James Murray \(QA/EMC\)'" <james.murray at ericsson.com>
> > Cc: 'Scar' <s-car-list at audifans.com>
> > Message-ID: <000101c64963$b2e156a0$c332b440 at wsrmd051>
> > Content-Type: text/plain; charset="us-ascii"
> >
> >
> >> For the snub mount, I highly recommend this snub mount modification
> >> upgrade!:
> >>
> >> http://forums.audiworld.com/s4s6/msgs/78276.phtml
> >>
> >
> > FYI, the 034 snub mount kit is not a direct bolt on for our
> cars, only
> > the smaller chassis cars with an inline 5 (4000/90). I just tried
> > fitting one to my car and the mounting slots do not line up.
> >
> > The 034 kit has zero play in it, the bushing friction fits
> inside the
> > bracket. I'm considering adapting the 034 bracket to the
> original one
> > so that there will be zero play.
> >
> > Sean
>
>
More information about the S-CAR-List
mailing list