[s-cars] Hydraulic Reassembly

bill mahoney airbil at gmail.com
Mon Mar 20 21:03:03 EST 2006


So, the hydarulic saga that featured my driveway as epa superfund site
continues a bit as I could not easily figure out  exactly how to
reassemble the reservoir in the dark and cold.... ("It's Hard Out Here
On A Wimp")
So, there's the float on a stick, a spring, a washer and the reservoir cap.
I "think" washer goes in first, then the float stick, then the spring
and then the cap... but where does the top end of the float stick go? 
There is a small hole in the top center underside of the cap but the
float stick seems to only sorta fit in there.  Bentley book shows two
washers and an bit different set up.
Should be simple right?  I had thought that I carefully disassembled
this and figured it to be a piece of cake to put it back together.
TIA!
Also... FWIW  lo and behold the old and famous Motive pressurized
bleeder cap also fits on the Pentosin reservoir and worked well to
purge the system.
Cheer's
Bill~now with constant brake light ~M


More information about the S-CAR-List mailing list