[s-cars] ECU pin removal

[Ronald Whiton]

Actually I am failing at something much simpler.  I am trying to
remove a couple indiviual wires (pin swapping) from the ECU plug,
which I have apart already.  I think I may have a bad ground to my cps
among other things and am trying to swap out pins/wires.

Ron

On 5/13/06, chris chambers <fastscirocco_2000 at yahoo.com> wrote:
> Ron,
>
> I don't know what the "official" method is, what I have found is:
>
>
> You need to undo 3 latches.
>
> With the ecu sitting down on its back and you facing the ecu's plug
> look to the left and right of the plug, you will see a black plastic
> "finger" or "latch. I insert a small screwdriver behind each of these
> pushing the "finger" towards the connector. Now go to the middle of the
>
> socket, look at the top you will see a little "notch", insert a 3rd
> screwdriver here lifting up slightly and you should be able to pull the
> circuit board away from the socket.
>
> HTH
> Chris
>
>
>
> --- Ronald Whiton <dooksniffer at gmail.com> wrote:
>
> > What is the trick to removing the female pins from the big connector
> > plug at the ECU.
> > I've tried poking a paper clip above the pins in the front while
> > pulling gently from the rear and they will not budge.  Please let me
> > in on the secret before I break something.
> >
> > TIA
> >
> > Ron Whiton
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> >
>
>
> Make April 15th just another day http://www.fairtax.org
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>