[s-cars] Wheel Centering Rings

[Premiere Investment Properties, LLC.]

Hi all
I have just purchased a set of these such wheels....I needed a set of 
spacers as the offset was a bit too narrow.  I didn't know that the hubs 
were different in sizing though. I know the Audis have a 57.1 mm bore,  I 
guess I need to check my new wheels
Tim
----- Original Message ----- 
From: "Tom Green" <trgreen at comcast.net>
To: <s-car-list at audifans.com>; <gregsj2 at gmail.com>
Sent: Friday, May 26, 2006 7:08 AM
Subject: Re: [s-cars] Wheel Centering Rings


> All the BBS aftermarket wheels I have used have a centering ring held
> in by a
> snap ring on the inside.  Simple job to pop the snap ring out to
> remove the ring.
> If bought new, the dealer usually includes the proper ring for the
> application.
>
> Tom
>
>> Date: Thu, 25 May 2006 21:10:21 -0700
>> From: "Greg Johnson" <gregsj2 at gmail.com>
>> Subject: [s-cars] Wheel Centering Rings
>> To: s-car-list at audifans.com
>> Message-ID:
>> <5d66273f0605252110x5fae68b7t7487ddcd901025d at mail.gmail.com>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>> Crew,
>>
>> This week I learned that *some* of the after market wheels for
>> Mercedes will
>> fit Audis and vice-versa.  All one has to do is change the
>> centering ring
>> and obtain correct bolts.  Any BTDT for changing the centering
>> rings.  Is
>> there a special tool or is it just pry and play?
>>
>> LeMans is in a few weeks.  Where will you be when Audi makes history
>> (again).
>>
>> Getting psyched in Spokane!
>>
>> Greg J
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list