[s-cars] RS2 Caliper Bracket GB

[Sean Douglas]

Manny wrote:

> 
> I was especially interested in the rotor sizes, as I had bought an extra
> set of 314x30 brembo rotors when Tire Rack had that part number snafu and
> were selling these as stock UrS4 rotor, but they weren't. That's why I
> wanted to know if I could run the 8A0 615 125 A version of the OE RS2
> caliper bracket with 314 rotors.

The 314 rotors and RS2 bracket do not work, the pad will hang over the edge
by about 3 mm.

> 
> I had the ECS Stage 2 brackets running the 323x30 Euro A8 slotted rotors.
> They always squealed like stuck pigs and I tried everything imaginable to
> stop the squeal, but nothing would last longer than a month.  So far not a
> peep out of the genuine RS2 caliper system, and I will report back after a
> month. I hope I have killed 2 birds with one stone.

I have the 993tt calipers, 323x30 rotors and RS2 brackets with Textar pads
and they squeal like a pig! When I switched to the 993tt rotors, with the
same pads, the squealing went away.

Sean D.