[s-cars] Outside temp indicator

[Robert Myers]

The sensor mounts in the lower grill - top center.

The first thing would be to replace the bulb for the display.  Pull 
the instrument cluster (two Phillips screws from underneath.  Pull 
off the lower trim strip freed by removing the screws.  Remove three 
move Phillips screws along lower edge of IC.  Slide the IC toward you 
and tip the top toward you.  Disconnect several electrical connectors 
now exposed.  Extract the IC in the general direction of the RF window.

The OAT display is held in the bottom of the IC by two small Phillips 
screws.  Remove these screws and carefully disassemble the 
display.  Keep careful track of what comes from where and in which 
orientation.  Once the bulb is disclosed desolder it and solder a new 
bulb in its place.  A replacement bulb is available at your nearby 
Radio Shack.  It is their smallest grain of wheat bulb (two to a blister pack).

Put it all back together.  If you still have no display then look to 
the sensor unit and/or the wiring for the sensor.

At 11:05 PM 10/1/2006, Bikeaudi at aol.com wrote:
>*This message was transferred with a trial version of CommuniGate(tm) Pro*
>Outside temp indicator is not working on 94urS4. Previously worked but did
>not have illumination.   Now nothing shows. Any clues as to where to start
>hunting? This little feature is handy here on ski days. Who is our 
>temp expert?
>MC in Spokane
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list


Bob
urS6 with RS2 and other mods for sale: http://chips-ur-s.com/S6.html