[s-cars] Studly Advice

[Young, Steve]

If I remember correctly, I used a socket on a universal joint on a long
extension that put the ratchet back near the firewall.  All this from
leaning over the RF fender, not from below.  Snake it in under the DP and
you should be able to get it.  Good luck. 


Regards,

				TRANE
Steven Young
Local Operations Manager
Albany Office




-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Robert Myers
Sent: Thursday, October 05, 2006 10:53 AM
To: s-car-list
Subject: [s-cars] Studly Advice


Hi Y'all,

I'm in the process of installing a new Stromung exhaust system.  Everything
but one item is pretty straight-forward.  That one thing has me a bit
stymied.  What's the trick to reach and remove the nut on the stud at the
bottom inside position?  It is invisible from above.  I don't have access to
a lift but a jack and jack stands are available and, of course, will be used
while working on the rest of the system.


Bob
urS6 with RS2 and other mods for sale: http://chips-ur-s.com/S6.html


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list