[s-cars] Remote not opening - help please!

[LL - NY]

Since the issue seems to be physical rather than electrical, I'd say
that inserting something insulated between the rubber button and
the contact would be appropriate. Reason for an insulated piece
would be IF it came adrift, it wouldn't cause any problems.

LL - NY

On 10/15/06, Tony Curran <tony.curran at sympatico.ca> wrote:
>
> I have a 96 S6 so have the two button wireless remote fob. The remote will
> lock the car but the open button doesn't work. Further invstigation shows
> the open function is working, tested by touching the contacts with wire on
> the bare circuit board. BUT when properly assembled, the metal pad isn't
> being forced down sufficiently to make contact when the rubber button is
> depressed. Could I just place something between metal thingy and rubber
> pad
> toassist in creating enough pressure to force metal thingy to cloce
> contact
> on the circuit board?
>
> Any other ideas how to fix this? New battery has been fitted. Thanks.
>
> Tony
> 96 S6
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>