[s-cars] wastegate/EM/corrugated pipe gaskets

[brian hoeft]

great guys, thanks

dave, i used to be a very faithful customer to that shameful
wisconsin shop, disgracing the state i was born in, with whom i spent
thousands,, until they sold me a bad,,&expensive camshaft (just saw the
receipt from web-cam yesterday) and then didnt want to know me or care about
their faithful customer anymore.  i was surprised and appalled to say the
least.

excuse me,,

that aside, absolutely i do plan on buying doubles of the line gaskets since
i will be removing the turbo,,  also on the flanges for the corrugated pipe,
doesnt the metal from the actual flex section protrude slightly onto the
flange?  are you running gasketless??  theres a little buzz/rattle that i
hear/see simultaneously of the corrugated pipe itself while revving the
motor, that once only existed when warming up..  moreso why im inclined to
retain gaskets there..

steve, much obliged,, i really need to load etka,, i have it but want it to
save to externalHD to keep a minimum on my laptop,, dont know how to do
that..

the one beneath the bowl as you put it is the one that looks worst,,
talking to the dealership over the phone 1/2 hour to no avail,, only the
suggestion that i'd need to purchase the entire wastegate. nothanks

& yes after not typing while on the phone w/my girlfriend theres not one
EM>WG, & that seat lends itself to a better seal..

thanks for the numbers big time!,, by the time i checked email the local
dealer stopped picking up his phone,, but maybe scott mockry could conjure
something since i now have the p/n's

thanks again!



On 4/25/07, Young, Steve <sryoung at trane.com> wrote:
>
>
> Brian...
>
> Here's what I found:
>
> 857 253 115     WG > Flex and Flex > DP
>
> 447 253 115     Turbo > DP
>
> 035 129 589D    Turbo > EM
>
> I know there is a gasket beneath the "bowl" of the WG, but ETKA doesn't
> have a breakdown of the WG.  I found this out when looking for a WG cap.
> I would try to re-use this gasket if possible.  There is no gasket shown
> at the WG to EM connection either.
>
> HTH
>
>
>
>
> Regards,
>
>                                TRANE
> Steven Young
> Local Operations Manager
> Albany Office
>
>
>
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of brian hoeft
> Sent: Wednesday, April 25, 2007 2:10 PM
> To: liSt
> Subject: [s-cars] wastegate/EM/corrugated pipe gaskets
>
> hi list,
>
> im having a heck of a time finding any gaskets besides   ' 035129589D '
> which im not sure is intended for the turbo>downpipe or EM>turbo..
>
> i just ordered hardware but couldnt order gaskets (034) since he didnt
> have them..
>
> i believe theres 5 or 6   one, from EM>WG one, in between sections of
> the WG
> (not the diapgram) one, at each end of the corrugated pipe(two),,  and
> then the EM>turbo and turbo>downpipe..
>
> anybody have a source or part numbers?  the dealer was no help and im
> surprised that javad doesnt offer them, SJM doesnt list them and
> autohausaz is where i got the above referenced p/n..
>
> has anyone just polished them babybut smooth and gone W/O gaskets all
> together?
>
> frustrated and hopeful
>
> --
> worldpeace, //brian
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>



-- 
worldpeace, //brian