[s-cars] Woah- me too!

Matt twentyV matt_20v at yahoo.com
Thu Jul 19 14:42:00 EDT 2007


Can I just swap the brackets and keep using the 933tt
rings with the ECS hats?  Or would that require a
different/ custom hat?
And btw the only pads I've found to be relatively
quiet is Mintex Red Box.  Hawk HPS and Mintex-C both
squeal badly even with anti-squeal on the back of the
pads.
-Matt
--- Sean Douglas <s_douglas at telus.net> wrote:

> Matt:
> 
> I see you have 993tt rotors too. The downside to
> using the S8 rotors are
> they are 2 mm thinner (32 vs 30), therefore the
> rotor will be 1 mm off
> center. Actually, its not a big deal, but you will
> get uneven pad wear.
> 
> Also, IME, the S8 rotors / 993tt calipers squeal
> like a pig even with
> copious anti-squeal compound.
> 
> With the 993tt rings and 993tt calipers they are
> silent as a mouse.
> 
> Sean
> 
> > -----Original Message-----
> > From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-
> > bounces at audifans.com] On Behalf Of Matt twentyV
> > Sent: July 19, 2007 10:25 AM
> > To: s-car-list at audifans.com
> > Subject: Re: [s-cars] Woah- me too!
> > 
> > This is looking like a much better way to go:
> > RS2 brackets $225
> > new bolts $40
> > S8 rotors $170
> > 
> > ECS responded, same deal as others report- send in
> the
> > old units and they'll send new ones, or buy new
> ones
> > and they'll refund the price once the old ones are
> > returned.  They are $300 for the set.
> > 
> > But with replacement 993tt rotor rings running
> close
> > to $200 each (and I need new ones soon), and this
> car
> > is street only, the RS2/ A8 will be more
> affordable
> > long-term and should eliminate this bracket
> exposure
> > too.
> > 
> > Thanks everyone.  I'll report on what I see with
> my 2B
> > brackets tomorrow.
> > 
> > -Matt
> > --- Sean Douglas <s_douglas at telus.net> wrote:
> > 
> > > Matt:
> > >
> > > 301A and 301J are inter-changeable.
> > >
> > > Sean
> > >
> > > > -----Original Message-----
> > > > From: s-car-list-bounces at audifans.com
> > > [mailto:s-car-list-
> > > > bounces at audifans.com] On Behalf Of Matt
> twentyV
> > > > Sent: July 19, 2007 10:07 AM
> > > > To: s-car-list at audifans.com
> > > > Subject: Re: [s-cars] Woah- me too!
> > > >
> > > > Thanks Sean.  After a little googling it looks
> > > like
> > > > 034's price is pretty good.
> > > > I found S8 rotors at autohausaz.com, 323x30,
> $85
> > > ea.
> > > > but p/n is 4D0 615 301J.  Does that sound like
> it
> > > will
> > > > fit?
> > > > Yes I need to fix this now!!
> > > > -Matt
> > > >
> > > > --- Sean Douglas <s_douglas at telus.net> wrote:
> > > >
> > > > > Hi Matt:
> > > > >
> > > > > Responses below:
> > > > >
> > > > >
> > > > > > First the brackets themselves, I see 034
> has
> > > them
> > > > > for
> > > > > > $225, is that a reasonable price?
> > > > >
> > > > > They were around $180 about 4 years ago, I
> guess
> > > > > inflation and the strong
> > > > > euro has increased prices.
> > > > >
> > > > > >
> > > > > > Rotors- what specific year/ model (A8/S8?)
> > > rotors
> > > > > and
> > > > > > better yet- part numbers.  Recommended
> sources
> > > for
> > > > > > good pricing?
> > > > >
> > > > > They are 323x30 from a 1999>2003 A8L or S8,
> part
> > > > > number is 4D0 615 301A
> > > > >
> > > > > >
> > > > > > I presume I should replace both the
> > > > > caliper-to-bracket
> > > > > > and bracket-to-strut bolts.  Should I use
> > > > > locktite,
> > > > > > and what sort of torque should be used.
> > > > >
> > > > > I don't use loctite, the torque setting for
> the
> > > > > bracket to strut is 90
> > > > > ft-lbs and the caliper to bracket is 75. New
> > > > > hardware is recommended.
> > > > >
> > > > > >
> > > > > > I probably should replace the braided
> lines at
> > > the
> > > > > > same time too, eh?
> > > > >
> > > > > Probably, but I use OEM rubber from the type
> 44
> > > > > cars, 405 mm long, part
> > > > > number 443 611 707C for like $20 each.
> > > > >
> > > > >
> > > > > Sean Douglas
> > > > > 1997 S6 RS2'd
> > > > > 1990 90q20v
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
__________________________________________________________________________
> > > > __________
> > > > Choose the right car based on your needs. 
> Check
> > > out Yahoo! Autos new Car
> > > > Finder tool.
> > > > http://autos.yahoo.com/carfinder/
> > > >
> _______________________________________________
> > > > S-CAR-List mailing list
> > > > S-CAR-List at audifans.com
> > > >
> > >
> http://www.audifans.com/mailman/listinfo/s-car-list
> > >
> > >
> > >
> > 
> > 
> > 
> > 
> >
>
__________________________________________________________________________
> > __________
> > Get the Yahoo! toolbar and be alerted to new email
> wherever you're
> > surfing.
> >
>
http://new.toolbar.yahoo.com/toolbar/features/mail/index.php
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> >
> http://www.audifans.com/mailman/listinfo/s-car-list
> 
> 
> 



 
____________________________________________________________________________________
No need to miss a message. Get email on-the-go 
with Yahoo! Mail for Mobile. Get started.
http://mobile.yahoo.com/mail 


More information about the S-CAR-List mailing list