[s-cars] Apikol coil conversion compatibility with MTM 1+

[Phil Mische]

034 should have the corrected wires very soon - even with them too long it's 
not that big a deal.  As for the directions there's a link online that is 
adequate.

The 034 plug ends don't seal the hole for the plug, so with no cover, or the 
Apikol cover, there would likely be a crud buildup, and if there was a 
dousing water would find its way there.

PJM
MTM+ w/ 034HO coils

----- Original Message ----- 
From: "Mike Claire" <mike.claire at gmail.com>
To: "S-car list" <s-car-list at audifans.com>
Sent: Friday, June 01, 2007 12:09 AM
Subject: [s-cars] Apikol coil conversion compatibility with MTM 1+


> I've seen some discussions about some 1.8T conversions not working well 
> with
> some chips (due to dwell differences I guess).
>
> Does anybody here run MTM 1+ with a 1.8T coil conversion?  Somebody on an 
> S2
> forum said they don't play very well together.
>
> I'm leaning toward Apikol for the harness.  We're still seeing comments
> about 034's excessive wire lengths, and documentation (lack of
> it).  (plus Apikol has that cool cover).
>
>
>
> Mike
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>