[s-cars] e//S2 in need of help

Dave Forgie forgied at ae.ca
Sun Mar 18 15:28:00 EDT 2007


Dave: If, in the end, you have to go in and do the Cam Positions Sensor
(G40 Hall Sender), then I suggest you have a browse of the link below
and its sub-links from the UrS4/S6 FAQ page on AudiWorld.  It has a
couple of descriptions of  R&R  techniques.  There is zero need to
remove the cam cover.  However, you do need to remove the cam belt cover
and the cam belt and sprocket.

http://forums.audiworld.com/s4s6/msgs/149821.phtml

Dave F.

>>> Dave Kase <davekase at pdqlocks.com> 03/18/07 11:13AM >>>
Well, its seems my A and B code sockets are not hooked up properly.  I

can't get any codes.

I read your posts on the S2 Forum and you say that the cps doesn't come

into play under normal driving.  That is what I was doing when the car

shut off.  I am trying to figure out if I should pull the valve cover 
and have a go at the CPS.  Any comments?

Thanks,
Dave K.

Dave Forgie wrote:

>Dave:  You are describing the results of a cam position sensor
failure. 
>I am not saying that's what it is but, if you can, pull the blink
codes.
> Look for 2113.  If I am right, the fix can be inexpensive using the
>Hall senders from BB Automacao as per the GB last year.
> 
>Dave F. 
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com 
>http://www.audifans.com/mailman/listinfo/s-car-list 
>  
>


More information about the S-CAR-List mailing list