[s-cars] Transmission install > what bits and pieces recommended?

[Joe Pizzimenti]

The clutch & flywheel are a system, replace them both at the same time.

Joe


On 5/3/07, Steve Voit <stevevoit at comcast.net> wrote:
> I'm putting in an EDU; it is about to be rebuilt at STaSIS.  They
> recommended a 'shifter rebuild kit' that is 'available from the dealer'  to
> replace wear items in the shift mechanism.  Sounds like a good idea - are
> you guys familiar with the availability of this kit?  They recommend
> replacing all the bushings associated with the shift selector rods, and I'll
> check that these would be included in a kit, if one is available.
>
>
>
> Will put in new clutch, slave, pilot/throwout bearings, etc.
>
>
>
> When does it make sense to replace the flywheel?  I'm planning on staying
> with the quiet and smoothness of the dual mass approach.
>
>
>
> Also, I'm planning on new trans mounts and new engine mounts while im in the
> vicinity.
>
> Any thoughts, and specifically ever heard of the kit?
>
>
>
> Seeking the most dakine oh-so-smooth box with happersized snick-snick and
> full JNR capability, whatever the hell that means.
>
>
>
> Thanks,
>
> Steve Voit
>
> 95.5 S6 Seattle
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>