[s-cars] Transmission install > what bits and pieces recommended?

[Vincent Frégeac]

This would be a perfect time for a short shift kit that will replace part of
the shifting links depending which kit you choose.

Also, while the tranny is out, I would at least clean/relube the front CV on
the driveshaft which seems to be the first part to fail, or even rebuild the
whole drive shaft, both CV and bearing, if you feel some play in them.




Vincent.

2007/5/3, Steve Voit <stevevoit at comcast.net>:
>
> I'm putting in an EDU; it is about to be rebuilt at STaSIS.  They
> recommended a 'shifter rebuild kit' that is 'available from the
> dealer'  to
> replace wear items in the shift mechanism.  Sounds like a good idea - are
> you guys familiar with the availability of this kit?  They recommend
> replacing all the bushings associated with the shift selector rods, and
> I'll
> check that these would be included in a kit, if one is available.
>
>
>
> Will put in new clutch, slave, pilot/throwout bearings, etc.
>
>
>
> When does it make sense to replace the flywheel?  I'm planning on staying
> with the quiet and smoothness of the dual mass approach.
>
>
>
> Also, I'm planning on new trans mounts and new engine mounts while im in
> the
> vicinity.
>
> Any thoughts, and specifically ever heard of the kit?
>
>
>
> Seeking the most dakine oh-so-smooth box with happersized snick-snick and
> full JNR capability, whatever the hell that means.
>
>
>
> Thanks,
>
> Steve Voit
>
> 95.5 S6 Seattle
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>