[s-cars] Phenolic spacers & turbo h2o feed line
David Kase
davekase at pdqlocks.com
Fri Nov 16 06:22:43 PST 2007
Hey Brian. I just have a comment on the hose.
I would get something from McMaster. They offer dozens of different
types of hose. You can narrow your search down by picking different
characteristics you are looking for (oil resistance, temp range,...).
The only issue might be the amount you have to buy. Some may be offered
by the foot, others may not.
Good luck,
Dave Kase
brian hoeft wrote:
> Hi listers, I am about to embark on a couple projects and would like some
> feedback.
>
> 1. My turbo water feed line below the IM -about a 6" long 5/8" diameter
> hose- is failing and I would like to know about its material.. It seems as
> though I could use generic hose bought nearly anywhere since it has no PN I
> could find.. Anybody go the plumbing supply house route on this or is
> there something specific?
>
> Also I am thinking of removing the IM for cleaning/easier access, and
> purchasing a phenolic spacer..
> But I was also thinking of POR'ing my IM since it has a tendancy to get
> grimy and seeing it shiny isnt my bag..
> Is that jacket of paint defeating the purpose of the phenolic gain if there
> even is a gain?
>
> With the phenolic spacers I also question fit afterwards of of the samco,
> throttle cable, block to IM brace, etc..
>
> Any wisdom here would be appreciated, thanks.
>
>
>
>
>
>
>
More information about the S-CAR-List
mailing list