[s-cars] UrS4 brake hardware question

[James Murray]

I heard the rotors where bigger, but wasn't sure about the calipers...
oh well, if that's the case then it's cheaper to stick with same setup
but better components like you mention below. 
 
/J.

________________________________

From: Taka Mizutani [mailto:t44tqtro at gmail.com] 
Sent: Wednesday, October 03, 2007 10:34 AM
To: James Murray
Cc: RM; s-car-list at audifans.com
Subject: Re: [s-cars] UrS4 brake hardware question


Euro S4s originally came with UFOs like the '91 200q and early V8q, the
later cars came with
the Lucas-Girling HP-2 calipers, same rotor dimensions as the B5 S4tt.
Those rotors are not compatible
with G-60 calipers- they are 314x30mm IIRC. 

The stock rotors on the US UrS are 276x25mm.

If you need something with more initial bite or higher coeff. of
friction, try EBC Yellowstuff, Hawk HP Plus- I don't
know how Porterfield or Pagid measure up- you shouldn't use race pads on
the street- they simply don't work in cold 
weather, they eat up rotors quickly if the brakes are in the proper
operating temp. and they make a ton of noise.

Taka



On 10/3/07, James Murray <james.murray at ericsson.com> wrote: 

	Rolf, what about going to the larger European UrS4/S6 rotor? I
think it
	uses the same G60 caliper, per but you have a larger rotor
diameter, I
	gather the bracket needs to be changed?(not sure the details).
Perhaps
	this is an intermediate upgrade at a lower cost?
	
	I heard the Euro S4's had larger rotors, but never investigated
the
	exact differences between the models. Perhaps someone will chime
in...
	
	/Jamu.