[s-cars] Heim links

[Bill M]

FWIW I got my HRSB link parts n pieces from McMaster Carr in stainless  
steel.  All and all in the end it was not that cheap IIRC.   Sorry I  
also do not recall exactly what parts I got but start with the  
diameter of the HSRB hole for the allen screws to go through.  I was  
able to get correct right and left turning threads.  I think the link  
itself was 4 to 6 inches in length.  Finally get some washers and lock  
nutz to match the screws and you are set.  (... all in stainless)
For a quick fix I think Autozone may have units ready to go but  
perhaps short in life span.  At least I swear I saw some there.
You should also get the upgraded lower connector from ... sorry to say  
I forget the fine fellow's name, but I am sure others here will recall  
contact info.
Bill~not much help but maybe some~M