[s-cars] Heim links

[brian bilotti]

John Tilden is the lower link man. Dave Stone at
PerformanceMachineworks 303-828-4546 has the whole kit
of metric stuff in Aurora rod ends in 6" length, rt
and lt hand threads, and all nuts and bolts. about
$200+ clams
IIRC.
HTH
Brian
--- Bill M <airbil at gmail.com> wrote:

> FWIW I got my HRSB link parts n pieces from McMaster
> Carr in stainless  
> steel.  All and all in the end it was not that cheap
> IIRC.   Sorry I  
> also do not recall exactly what parts I got but
> start with the  
> diameter of the HSRB hole for the allen screws to go
> through.  I was  
> able to get correct right and left turning threads. 
> I think the link  
> itself was 4 to 6 inches in length.  Finally get
> some washers and lock  
> nutz to match the screws and you are set.  (... all
> in stainless)
> For a quick fix I think Autozone may have units
> ready to go but  
> perhaps short in life span.  At least I swear I saw
> some there.
> You should also get the upgraded lower connector
> from ... sorry to say  
> I forget the fine fellow's name, but I am sure
> others here will recall  
> contact info.
> Bill~not much help but maybe some~M
> 
> 
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 



      ____________________________________________________________________________________
You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.  
http://tc.deals.yahoo.com/tc/blockbuster/text5.com