[s-cars] BBK parts list

[McCall, Randy]

Ron,

My S6A came with the BBK already installed, but that list is consistent
with another parts list I had - I don't think you will really need the
wear sensors as they are a pain to reconnect to the stock connectors (as
in they don't), plus I think you have to drill the pad material on the
Textar pads..  I recently ordered new pads and rotors and got the
correct parts (once I figured out that I had Stage II ECS brackets for
which there have been some noted failures, and for which the 323x30
rotors didn't actually fit!)  Some actual RS2 brackets and correct bolts
from 034, shaved to correct for the offset discrepancy from 32mm thick
Porsche rotors, got me feeling secure once again.  The part numbers for
the rotors and pads were:  4D0 615 301 J for A8L Euro rotors and 928 959
949 03 for the stock Textar pads.

My car also came to me without the vibration dampers - the old pads and
rotors did not make any noise, but when I put on the new rotors and pads
there seems to be just a faint hint of brake squeal at low braking loads
at low speeds.  None otherwise....(can't say the same for some other
essentially new but unknown mfr. pads that also came with the car - they
squealed like howling peacocks at full alert at all but very high
braking efforts). No idea if the dampers would have helped with those
other noisemakers...  

-Randy

95.5 S6 Avant; Pearly white, TT HID's, BBK, tastefully chipped and
sportin' Euro suspenders 
Salem, OR
 


Date: Mon, 7 Apr 2008 13:50:00 -0600
From: "ron kirkham" <rkaudifool at gmail.com>
Subject: [s-cars] BBK parts list
To: s-car-list <s-car-list at audifans.com>
Message-ID:
	<b611a8c90804071250k4fadb7a3uc571a07e37230ec2 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hello all,

I'm looking to place an order for a Porsche 928 Big Black set up and
would like those in the know to review my list of parts and numbers.  I
assembled this list from several locations, so I want to make sure I'm
covered before I drop the coin.  Car is a 95.5 S6A.

Porsche 928 GTS calipers - 928.351.423.03 (L)  928.351.424.03 (R)

Audi RS2 Brackets - 8A0.615.125.A

Audi A8 Rotors - 323x30 - 4D0.615.301.A or J (?)

Bolts:  Caliper to Bracket (4 rqd.) 999.067.041.09
            Strut to Bracket (4 rqd.) N.100.880.03  m12x1.25x25mm

Vibration Dampers - 36mm (4 rqd.) 964.351.096.01

Wear Sensors - (2 rqd.)  928.612.361.00

Brake Lines - (2 rqd.)  443.611.707.C M-F 405 mm long ( is this a
Porsche part number?)

Brake Pads - Texstar - don't have a part number

Brake Fluid - I'll be using Super Blue ? quantity required.

Is this the full list of what I'll need to do this?  Bolts, dampers,
wear sensors, lines and pads are all Porsche parts correct?

Anybody shop these parts lately that found a good source and price?

Thanks for any help.

Ron