[s-cars] Issue with replacing clutch on 95 S6

[chris chambers]

There have been alot ofproblems of LUK providing the wrong
clutch's for the UrS4/S6.

http://forums.audiworld.com/s4s6/msgs/245912.phtml

Hope that isn't your problem!


Chris


--- Elvis Palombizio <elvis.palombizio at gmail.com> wrote:

> Seasons Greetings S-heads,
>        What better way to end 2008 than to replace the clutch on my
> 95 s6.
> The throwout bearing was going big time so I figured I'd do it
> myself..with
> the help of a friend and his shop's lift of course!
> 
>       Anyways, I use a LUK repset and had the flywheel machined..
> also
> replaced the clutch slave cylinder pilot bearing and the usual items.
> 
>      Last night, we put the car back together and the engine seems
> "locked".
> Car can't start. The starter works fine, but the flywheel only turns
> a
> little bit now before its movement is prevented from going further.
> Now when
> I put the flywheel on, I know the flywheel could turn on its own, but
> before
> I take the whole thing back apart, was just wondering if anything
> jumps out
> at any of you.
> 
> Hope your holidays go well!
> 
> -- 
> Elvis
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 


Make April 15th just another day http://www.fairtax.org