[s-cars] front turn signals
Robert Rossato
bob.rossato_af at cox.net
Sun Jan 27 07:08:46 PST 2008
This may be a little late, but don't forget that you need to unlock the
tab first. There is a Phillips shaped plastic screw you have to turn a
1/4 turn to allow the tab to be pushed down. Once that is done, then
you can push the tab to release the turn signal housing. The tab is
spring loaded and clicks in place to hold the turn signal housing in.
The screw is a safety lock to prevent the tab from being pushed down.
Of course, this assumes that if anyone removed them previously, they
didn't leave the tab in the unlocked position. In which case you'll be
able to push down on the tab unencumbered. The screw/tab can be
accessed through a slot in the radiator support next to the fender.
Bob
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of James Murray
> Sent: Wednesday, January 23, 2008 10:57 AM
> To: john cléirigh
> Cc: s-car-list at audifans.com
> Subject: Re: [s-cars] front turn signals
>
>
> Hi John,
>
> Open your hood (use a flashlight or light source) and look
> for a tab right behind turn signals, take a long screwdriver
> and push down on the tab, you can now pull out the turn
> signal lights. The bulbs will come out with a turn of the
> socket. When you replace the turn signal assembly be sure you
> hear a firm "click" of the tab... And visually inspect it, if
> it doesn't sound or look right push harder... Otherswise you
> risk finding your turn signal in many pieces on the
> autoroute.... BTDT.
>
> Cheers, /Jamu.
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of john
> cléirigh
> Sent: January 23, 2008 9:27 AM
> Cc: s-car-list at audifans.com
> Subject: [s-cars] front turn signals
>
> I'm stumped. The owner's manual image must be of an A6 and
> the AAN layout blocks my view? I can't figure out how to
> change turn signal bulbs w/o removing the headlight
> assemblies first. Is there an easier way that I'm missing?
>
> john
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
More information about the S-CAR-List
mailing list