[s-cars] Timing Belt R&R

[Mark Strangways]

You don't expect that the guys in USA would be able to get 50mm square stock 
readily do you ?
I mean it the USA... Land of inches and feet :-)

(all said with the utmost respect and joking, note the smiley :-) )

Mahhhahhahaha
----- Original Message ----- 
From: "Sam Clarkson" <sam at edgetoedge.co.nz>
To: <s-car-list at audifans.com>
Sent: Wednesday, June 04, 2008 5:33 PM
Subject: Re: [s-cars] Timing Belt R&R


> It's easy to do the timing belt
> My S-car is currently in bits doing the job (waiting for the correct
> fanbelt, they sent me the wrong one)
> You DON'T need the special tools! Yay!
> Make a crank locker (3256 tool) by cutting a 85mm length of 50mm box
> section steel and welding an angl iron 'leg' around 500mm onto it. The
> 27mm socket will fit through it. I jacked the car up, put the 'tool'
> into the front pulley and let the car down till the leg touches the
> floor sufficiently to allow me to swing on the length of pipe you need
> to break/redo the torque.
> The excellent  timing belt write up is here
> http://www.sjmautotechnik.com/trouble_shooting/S4timing.htm
>
>
>
> Sam Clarkson
> 44 Findlay st
> National Park Village
> New Zealand
> (07)8922759
> 93 S4 6 speed
> 00 allroad 2.5 tdi tip
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>