[s-cars] AAN Cylinder Head Swap SW/Western CT
Chris Hawkins
ripit69 at comcast.net
Mon May 12 12:08:09 PDT 2008
Hey Guys,
I was curious if anyone had any suggestions for a reputable shop or shade
tree to do an AAN cylinder head swap out on a '95 S6? I picked up a P&P'd
head from Weldo a few months back, he completely rebuilt it as well w/ all
new hardware. It seems the valve stem seals may be leaking on the current
head, it smokes from the tail pipe a lot from a dead stop and when idling
for a long period of time. IIRC those are some signs the seals are
going/done. I'd supply all of the parts, gaskets, head studs/nuts, beer,
etc.
Figured since the cams, etc. have to come out to replace the seals I may as
well go the distance and install the new head and do a TB replacement as
well. It is a little beyond my experience to do the swap myself, however I
would be an eager apprentice if a shade tree wanted to make a few bucks and
teach a noob some tricks. Otherwise if there is a reasonable, trustworthy
shop around you guys have had good luck with it would be appreciated if you
could forward their info.
Thanks in advance for any help and/or advice.
Kind Regards,
Chris
More information about the S-CAR-List
mailing list