[s-cars] refilling brake system

[Kneale Brownson]

Audi says pressure bleeder.  Start farthest from the reservoir and end closest.  I use the pressure bleeder to do the clutch slave too.
   
  Pumping either pedal puts you in danger of having the piston travel farther than normal, resulting in its seals encountering stuff in the cylinder that might lead to damage.

theringmeister at triad.rr.com wrote:
  OK so it's been sitting a while, but I finally got my clutch slave cylinder back on the cq last night and the line hooked back up. I've also replaced the clutch master cylinder and all 4 brake lines at the wheels with stainless, and rebuilt all 4 calipers. It's time to refill the system since it's empty. Should I just open all the bleeder screws and start pouring fluid in and wait? I know there's a procedure for bleeding the brakes, but what about just filling the system full of new parts?

Any right or wrong?


--
Wylie Bean
TheRingmeister at triad.rr.com
90 cq
91 90q20v sport
92 UrS4
01 allroad

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)