[s-cars] Need part number help for a steering wheel swap.

[Eric Phillips]

Wylie has it right!  :)

Yeah, I'd like to retain the airbag.

I *guess* I could try the stealer, but the clockspring itself is some
huge expense.  I'd rather get it all used, LOL.

Then there's the trip computer issue - I don't even know where to go
with that.  I guess if I ever buy the car and replace the wheel...

On Sun, Nov 2, 2008 at 3:34 PM, Wylie Bean <theringmeister at triad.rr.com> wrote:
> Sean
> I think he's talking about putting the 95.5 S6/A4 Sport wheel on, which can be done with a few additional parts from the dealer or a fortunate trip to a boneyard.
>
> Good point about the AudiSport
> Euro wheels though.
>
>
> Wylie Bean (via blackberry)
> 90 cq
> 91 90q20v
> 92 UrS4
> 01 allroad
>
> -----Original Message-----
> From: "Sean Douglas" <s_douglas at telus.net>
>
> Date: Sun, 2 Nov 2008 14:42:20
> To: 'Eric Phillips'<gcmschemist at gmail.com>
> Cc: <s-car-list at audifans.com>
> Subject: Re: [s-cars] Need part number help for a steering wheel swap.
>
>
> I still have my 1990 90q20v and have fitted a S2 wheel with no adapters
> required.
>
> I also had a Nothelle wheel on it for a while too, same thing, no special
> adapters required.
>
> IMHO, the S2 wheel was nicer than the Nothelle wheel, both were the same
> diameter, but the S2 was thicker.
>
> This is a non-air bag car, not sure if air bag cars make a difference.
>
> Sean
>
>
>> ---- Eric Phillips <gcmschemist at gmail.com> wrote:
>> > No, not for an S-car, but the car *is* a 5-pot with 20 valves.  :)
>> >
>> > I know quite a few of you had/still have B3 20V cars, and I
>> am in the
>> > process of acquiring one myself.  One of the things wrong
>> with the car
>> > is the steering wheel - it's getting a bit funky at 10 and
>> 2, and I'd
>> > like to change it out for a wheel that's a bit more like my
>> S6 wheel.
>> > You know, nice and thick at the user interface.
>> >
>> > I have read a bunch in AW about the swap, but lack the
>> critical part
>> > numbers to source the column covers, column switches and
>> adapter ring.
>> >  Do any of you guys have this info?  Have any of you actually done
>> > this mod?
>> >
>> > Thanks gents!
>> >
>> > Eric