[s-cars] EU Light Question

Douglas Fifield douglas.fifield at gmail.com
Thu Apr 16 13:46:24 PDT 2009


If the stock headlight harness plugs right into the EU headlight
housing, is the extra pin (the red wire) going to be energized by the
stock harness?

D.

On Thu, Apr 16, 2009 at 3:38 PM, Lee Levitt <lee at wheelman.com> wrote:
> That's what I did on each of my 3 C4 A6 cars. Pull out US DOT
> headlamp, install ecode lamp, plug in and turn on.
>
> The two hardest parts of this job are removing the trim piece
> under the lamp and getting the plug off the housing. Unless of
> course, you've done it before, in which case it's easy!
>
> Lee
>
>
>
> On Thu Apr 16 14:51:17 CDT 2009, Douglas Fifield
> <douglas.fifield at gmail.com> wrote:
>
>> Will the lights work properly if I just plug the US harness into
>> the
>> EU light housing?
>>
>> -- Douglas in MN
>> 95.5 Audi S//6 Avant
>> 73 BMW R60/5 mit Toaster Tank
>



-- 
Douglas in MN
95.5 Audi S//6 Avant
73 BMW R60/5 mit Toaster Tank


More information about the S-CAR-List mailing list