[s-cars] bomb return line part number
Varon H. Fugman
vfugman at globaldialog.com
Sat Apr 25 09:33:46 PDT 2009
Does anyone have a part number - or know if there *is* a part number - for
the bomb return line? It is the rubber hose with a couple of 90 degree
bends (and sleeve over one part to protect it from chafing.) Illustration
612-30 in ETKA shows it as part 13A, but it is not listed in the
corresponding parts list.
(I assume part 13 which is listed as 443 612 733 C is for non-AAN cars.)
Because I am replacing most of the hoses in the hydraulic system anyway
(J-hose was leaking badly and pump-to-rack hose starting to seep), I want to
replace *all* of them including the low pressure return lines on the theory
that they are slowly deteriorating due to long-term exposure to mineral
hydraulic fluid.
Also, any recommendations on a source for the return hoses that go to & from
the cooler? They are marked as 16x10 on the hose (which I assume is O.D.
and I.D. in mm.) Illustration 422-45 shows this as part 6 (at least for
cars w/o the cooler), but again lists no part number. I'm concerned that if
I pick up some generic hose locally it may not be compatible with the
mineral hydraulic fluid.
Varon
'95 S6 up on jackstands
More information about the S-CAR-List
mailing list