[s-cars] Suspension shit list

[Taka Mizutani]

I hope you bought an aftermarket piston-type bypass valve, as the OE Bosch
ones will not hold up for long once you're chipped or especially if you're
running a big turbo.

Taka


On Wed, Dec 16, 2009 at 4:36 AM, Cory Pio <cpio921 at gmail.com> wrote:

> Hey guys,
>
> I just ordered the following parts from partsgeek.com to completely
> revamp my clunking rolling stock 131000 mile suspension: febi tie rod
> assembly right and left), febi control arms rear left and right, Trw
> complete front left and right control arms with inner and outer
> bushings and control arms, 2 feq strut bearing and upper strut mounts,
> and feq trailing arm bushings. Oh and last but not least oes genuine
> sway bar bushings.
>
> Now can I get your guys honest opinions on feq parts for the strut
> bearings and upper mounts. I dot want my car to clunk in the front end
> anymore. I will be ordering konis and hr races to complete the package.
>
> What do I do about the stock rear shock mounts. Is there a replacement
> option? Any other key components I am missing that should be replaced
> in a full suspension overhaul? This is my first time undertaking the
> suspension on my s4. I want to get this solid so I don't have to worry
> about it for awhile.
>
> Oh an thanks for the tips guys I turned out that replacing the bpv
> fixed all my problems and the turbo is spoiling perfect in 1 st again,
> hitting 15psi everytime. Thank again everyone
>
> Take it easy
>
> Sent from my iPhoneo
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>