[s-cars] Clutch Adjustment?

[Paul Luevano]

Steve Mills wrote:
> You may have the wrong pressure plate. I replaced my stock dual mass 
> with a 7A flywheel (which is what most of the AL flywheels are modeled 
> on) and found that you needed to fit a 7A-style pressure plate, which is 
> significantly deeper. There is a thread on this at 
> http://forums.audiworld.com/showthread.php?t=2177360
> 
> While I was doing the research, we heard about a number of premature 
> slave failures that we now believe were caused by using a 7A-style 
> flywheel with a stock (AAN-style) pressure plate- the extra 3/8" of 
> travel that the mismatched PP required was most likely the cause.

	Thanks for the feedback and the link.  So it sounds like my only course 
of action it to crack it open and see what is what.  I still have the 
original flywheel and PP.

-- 
____________________________________________________________________
Paul Luevano            |   AMA * MSF   |'99 CBR 600F4  (Racebike)
http://teamdaemon.com   | USM * CCS #898|'97 CBR 1100XX (Streetbike)
Waltham, MA USA         |  NMA #116657  |'95.5 //S6     (Winter)
_____"The purpose of man is to live, not to exist."-Jack London_____