[s-cars] Pollen filter

[Matthew Russell]

... And it's even out of stock. Thanks for nothin Bill! 8-)

Actually, a bit of info gained: I'll try to see if i can find a p/n on  
the evaporator housing.
Stott and I have been emailing about this offlist, this may be another  
example of assembly line differences?!

Matt




On Aug 4, 2010, at 12:41 PM, Thomas R Green <trgreen at comcast.net> wrote:

> I am distressed that you would recommend Blau for the filter, Bill.   
> Not that his
> filter won't fit, because it probably will, but because he charges  
> $10 more than
> Miramar Audi charges for the genuine part-no question it works.
>
> Matt, hopefully this QW thread will help clear up your fan support  
> bracket and
> bearing issue.  I don't know what part was ground down but you may  
> need to
> replace some parts.  Note that the UrS4 and UrS6 brackets and  
> bearings are
> different.
>
> http://forums.quattroworld.com/s4s6/msgs/33332.phtml
>
> Tom
>
>
>> -----Original Message-----
>> Date: Wed, 4 Aug 2010 09:44:57 -0500
>> From: "Bill Mahoney" <wmahoney at disk.com>
>> Subject: [s-cars]  Pollen filter BTDT
>> To: <skippertgore at gmail.com>
>> Cc: s-car-list at audifans.com
>> Message-ID: <00ee01cb33e3$9bb11e60$d3135b20$@com>
>> Content-Type: text/plain;    charset="us-ascii"
>>
>> Matt,
>>
>> Lookee here. maybe you have this other housing they mention?
>>
>> http://www.blauparts.com/proddetail.asp?prod=E4A2013
>>
>> I would just try to make it fit.  Aka big hammer.
>>
>>
>>
>> WRT fan clutch, why anyone would muck it up is beyond me.
>>
>> This is a repair that can be done only the correct way with the  
>> right parts.
>>
>> I replaced both fans about a year ago and the A/C now blows as cold  
>> as ever.
>>
>>
>> Works great and doesn't cycle off at traffic lights (and not  
>> because I don't
>> stop:)
>>
>>
>>
>> Bill~filtered & fanned~M
>>
>>
>>
>> Ps   Get it all good for a short commute to sfest this year!  Ya  
>> only live
>> once ya know.
>